Shipping times may vary due to the Covid-19 outbreak and postal disruptions. Thank you for your patience!

How to Clean your new glass pipe.

Posted by on

How to clean Your New Glass pipe!

Supplies needed:
  • 91% Isopropyl Alcohol
  • Small cup
  • Q-tips
  • Zip lock baggie
  • Salt
  • Gloves (optional)

 

This pipe requires special care for longevity of its life.

I recommend cleaning your new pipe every 1-2 weeks (or when you see resin build up) Also using a q-tip with alcohol every 1-2 weeks. 
This will prevent from heavy build up.
Only Do A Deep Clean When The Pipe Is Black With Resin Inside.
Seriously, Only do this If completely necessary!!
  1. Place pipe in ziplock baggie. 
    ***Please note, that if you purchased a large water pipe,
    do NOT PUT IT IN A ZIP LOCK BAGGIE.
    These directions are for DRY pipes only!
  2. Fill bag with alcohol until it covers the pipe
  3. Shake the bag until the alcohol turns black-ish.
  4. Run under Smokin hot water!!!! This helps loosen the resin.
    *I recommend Wearing gloves for this step,
    the water is hot and the resin is sticky.
  5. Use q-tips to clean out bowl.
  6. Repeat this step until clean!
If you have any questions,
comments or concerns,
please feel free to reach out to me!
text: 1-949-444-AURA (2872)

← Older Post Newer Post →



Leave A Comment

Please note, comments must be approved before they are published